Aluminum power drifter post by sbeausol » wed apr 08, 2009 10:24 pm i am currently investigating the potential to build a power drifter style boat out of aluminum, which i intend on outfitting with a jet powered outboard somewhere in the range of 40hp at the pump.. The boat i'm interested in building is about 18-20ft power drifter style boat, i will attach a picture. the one in the picture i believe is a stitch and glue plywood/glass. my plans are to use the aluminum faced ply for the bottom by doing a overlapping butt joint where the aluminum overlaps the face of the aluminum on the next piece. i. Aluminum hulls use 3/16" bottom and 1/8" sides - heavier scantlings than most boats this size and in keeping with the tough intended usage. power comes from a 20" or 25" shaft length outboard fitted with jet pump for whitewater use, or standard propeller otherwise..
Party boat pedal-it pee wee phantom picklefork pirogue play 'n jane play pen pot luck power drifter power-row skiffs power skiff 12 power skiff 14 power yak pug q quest r rampage raven rc model x1 rebel rebel tug reliant renegade river rat riviera rob roy rogue runner roustabout rowme s saboteer sabotina scooter scrambler scull boat sculling. The floor structure of all power boat models consists of 6-7 one piece longitudinal stringers formed to the shape of the hull. only the finest marine grade aluminum alloys (5052-h32 and 5086-h32) are used in the construction of all koffler power boats.. In addition, the jet drifter is also designed to be able to row. the jet drifter can be custom built in 16’, 17’, or 18’ lengths. similar to our koffler power boat models, the jet drifter can be equipped with inboard or outboard power and with a flat or semi-v bottom..
0 komentar:
Posting Komentar